sumedianet

Makita DTM52Z Information The Makita DTM52Z is a 18V brushless multi-tool that is perfect for a variety of applications, including cutting, sanding, and grinding. It is powered by an 18V Li-ion LXT battery and features a powerful brushless motor that delivers up to 20,000 oscillations per minute. The DTM52Z is also equipped with a soft start function for smooth starts, a variable speed dial for precise control, and a constant speed control system that automatically applies additional power to the motor to maintain constant speed under load. Image:

Parkside PKZ 180 C3 Information The Parkside PKZ 180 C3 is a portable air compressor that is perfect for a variety of tasks, including inflating tires, blowing off dust, and powering pneumatic tools. It is powered by a 1100W motor that produces a maximum pressure of 8 bar. The compressor has a large tank capacity of 180 liters, which allows it to work for extended periods of time without having to cool down. The PKZ 180 C3 is also very lightweight and portable, making it easy to transport to and from different locations. Image

Bosch 11253VSR Information Introduction The Bosch 11253VSR is a 1-inch SDS-plus rotary hammer that is designed for a variety of applications, including drilling through concrete, masonry, and brick. It features a powerful 7.2-amp motor that delivers 2.2 feet-per-pound of impact energy, as well as a three-mode selector that allows you to choose between rotary hammer, hammer-only, and rotation-only modes. The 11253VSR also includes a Vario-Lock positioning system that allows you to rotate and lock the chisel into 36 different positions, for optimal working angles. Image

APPA 97R Information the information about the APPA 97R multimeter: Introduction The APPA 97R is a professional-grade digital multimeter that offers a wide range of features and measurements. It is ideal for electricians, technicians, and hobbyists who need a reliable and accurate tool for electrical work.

Steren CAU-179 Information The Steren CAU-179 is a desoldering pump that is designed for use in electronic repair and maintenance. It features a comfortable, cushioned handle and a durable plastic body. The pump has a suction cup that is made of heat-resistant Teflon, which allows it to be used on components that have been heated up to 400 degrees Celsius. Image of Steren CAU-179 desoldering pump The CAU-179 has a maximum vacuum of 600 mbar, which is sufficient for removing even the most stubborn solder joints. The pump also has a built-in heat sink that helps to prevent it from overheating.

Ozito CDL-1810 Information the information about the Ozito CDL-1810 cordless drill: Intro The Ozito CDL-1810 is a powerful and versatile cordless drill that is perfect for a variety of tasks around the home and workshop. It is powered by an 18V lithium-ion battery that provides long runtime and fast charging. The drill has a 2-speed gearbox for precise control, and a keyless chuck for quick and easy bit changes. It also features an LED work light for illumination in dark areas.

DeWalt DW359 Information The DeWalt DW359 is a 7-1/4-inch corded circular saw that is designed for professional and DIY use. It features a 15 amp motor that delivers up to 5,500 RPM, making it capable of cutting through a variety of materials, including wood, metal, and plastic. The saw also has a bevel capacity of 45 degrees to the left, and a cutting depth of 2-1/4 inches at 90 degrees. Image of DeWalt DW359 circular saw Here is a table of the full specifications for the DeWalt DW359:

HiKOKI NR65AK2 Information The HiKOKI NR65AK2 is a high-powered, professional-grade strip nailer that is designed for use in a variety of applications, including roofing, siding, and framing. It features a powerful 2.4-joule motor that drives 18-gauge nails up to 1.75" long with ease, and its lightweight design makes it easy to use for extended periods of time. The NR65AK2 also features a number of other innovative features, such as a built-in depth adjustment, a belt hook, and a safety switch. Image

Ferm ESM1009 Information the information on the Ferm ESM1009: Introduction The Ferm ESM1009 is an 125mm / 5" orbital sander with a powerful 450W motor. It has a variable speed control from 6000 to 14000 RPM, allowing you to adjust the speed to the task at hand. The ESM1009 also features a dust extraction port, making it easy to keep your work area clean.

Stanley SXCM27550323 Information the information about the Stanley SXCM27550323 air compressor: Introduction The Stanley SXCM27550323 is a 2.75HP, 50L twin-stack low noise air compressor. It is designed for a variety of tasks around the home and the trade, including inflating tires, running power tools, and cleaning surfaces. The compressor features a powerful 210L/min free air delivery at 145PSI, making it ideal for demanding applications. It is also relatively quiet, making it a good choice for use in residential areas.

Black & Decker CD701 Information The Black & Decker CD701 is a 1800-watt heat gun that is designed for a variety of tasks, including shrink wrapping, paint stripping, and thawing frozen pipes. It features two temperature settings (350°F and 700°F) and a variable speed control, so you can customize the heat output to the specific task at hand. The heat gun also has a built-in stand, so you can set it down hands-free, and a hanging hook for storage. Image of Black & Decker CD701 heat gun Specifications

Makita HR4013CV Information The Makita HR4013CV is a 1100-watt SDS-Max rotary hammer with a maximum impact energy of 8.0 joules. It is designed for heavy-duty demolition and drilling applications, and features a number of innovative technologies to reduce vibration and noise. Image of Makita HR4013CV Specifications

Monacor ZM-100 Information The Monacor ZM-100 is an impedance meter that can be used to measure the impedance of individual speakers or speaker lines. It uses a pulsed 1 kHz signal for measurement and is processor-controlled, with the ability to independently select the most favorable measuring range. The ZM-100 can also calculate and display the power received at the mains of a 100 V speaker. Introduction The Monacor ZM-100 is a small, portable impedance meter that is easy to use and provides accurate measurements. It is ideal for audio professionals, installers, and DIY enthusiasts who need to measure the impedance of speakers or speaker lines.

Hitachi C 18DL Information The Hitachi C18DL is a 6.5-inch cordless circular saw that is powered by an 18-volt lithium-ion battery. It has a no-load speed of 3,400 RPM and can make cuts up to 2-1/4 inches deep at 90 degrees and 1-9/16 inches deep at 45 degrees. The saw features a left-mounted blade for convenience, an electric brake for increased safety, a fan-cooled motor for increased run times and maximum power, a built-in spotlight for improved visibility of the cut line, and a bevel angle that adjusts up to 50 degrees. Image of Hitachi C 18DL circular saw Here is a table of the full specifications of the Hitachi C18DL:

Black & Decker HP188F3 Information the information about the Black & Decker HP188F3 cordless drill: Introduction The Black & Decker HP188F3 is a 12-volt cordless drill that is perfect for light-duty household projects. It has a compact design and lightweight construction, making it easy to maneuver in tight spaces. The drill also features a variable speed trigger and a two-speed gearbox, so you can choose the right speed for the task at hand.

Gossen Metrawatt Metrahit IM E-DRIVE (M274A/B) Information The Gossen Metrawatt Metrahit IM E-Drive (M274A/B) is a portable, rugged multimeter, milliohmmeter, insulation tester, and coil tester that is ideal for safety testing and diagnostics at electric and hybrid vehicles, as well as all types of electric machines. Specifications

Ferm CRM1042 Information The Ferm CRM1042 is a 1.5HP, 24L oil-free air compressor that is perfect for a variety of tasks around the home and workshop. It features a powerful pump that can quickly fill the tank to maximum pressure, and it has a long lifespan thanks to its silent direct drive induction motor. The CRM1042 also comes with a number of useful features, including two manometers for monitoring both tank and outlet pressure, a built-in pressure regulator, and a quick-release coupler for easy tool attachment. Image: Specifications:

Gardena EasyCut Li-18/50 Information the information about the Gardena EasyCut Li-18/50: Intro The Gardena EasyCut Li-18/50 is a lightweight and cordless hedge trimmer that is perfect for small to medium-sized gardens. It is powered by a 18 V lithium-ion battery, which provides up to 60 minutes of runtime. The trimmer has a cutting width of 50 cm, and it can be used to trim hedges, shrubs, and other plants. It is also equipped with a safety blade guard to protect the user from injury.

Einhell TC-GW 190 D Information The Einhell TC-GW 190 D is a versatile shielding gas welder that is designed for joining together metal elements and structures on a permanent basis using the MAG method. It is a powerful and reliable tool that is perfect for a wide range of welding applications, from home DIY projects to professional repairs. Image: Full specifications: